Includes one pair of intake flanges for the Buick Nailhead 264, 322 hot rod motor (see motor applications below). These flanges are cut with a CNC HD (High Definition) Plasma cutter out of 3/8” Pickled and Oiled (P&O) steel. P&O material is hot rolled steel that has been dipped in acid to remove the mill scale and then a light coated lightly with oil. The end result is less work to clean off the mill scale as needed with hot rolled mild steel.
Motor Application:
Buick Nailhead
264 cu. in (1954-55)
322 cu in (1953-56)
*more applications/years may work, verify before purchasing.
Ports designed to be used with 1 3/4” OD tubing.
These flanges are designed in CAD and are test fit to make sure proper fitment is achieved.
| Weight | 2.721554 lbs |
|---|---|
| Dimensions | 4 × 20 × 4 in |
You must be logged in to post a review.
Related products
Cadillac 331 (Early) Exhaust Flange
Includes one pair of exhaust flanges for the Cadillac 331 (early, small port heads) hot rod motor (see motor applications
Chrysler Hemi 331-392 Exhaust Flange
Includes one pair of exhaust flanges for the Chrysler Hemi 331, 354, 392 hot rod engine (see engine applications below).
Chrysler Hemi 331-392 Intake Flange
Dodge Hemi 241-325 Exhaust Flange
Includes one pair of exhaust flanges for the Dodge Red Ram Hemi 241, 270, 315, 325 hot rod engine (see
Ford Flathead 221-239 Exhaust Flange
Includes one pair of exhaust flanges for the Ford Flathead V8 hot rod engines (see engine applications below). These flanges
Oldsmobile 324-371 (Split Port) Exhaust Flange
Includes one pair exhaust flanges for the Oldsmobile 324, 371 hot rod engine (see engine applications below). These flanges are
Oldsmobile Big Block 350-455 Exhaust Flange
Includes one pair of exhaust flanges for the Big Block Oldsmobile 400, 425, 455 hot rod engine (see engine applications










Reviews
There are no reviews yet