Includes 1 U-Weld Intake Kit for the Chrysler Hemi 331, 354, 392 hot rod engine (see engine applications below). The flanges in this kit are cut with a fiber laser. This kit is designed to be a single plenum design with the use of 3 carburetors.
Engine Application:
Chrysler Hemi
331 cu. in (1951-56)
354 cu in (1956-58)
392 cu in (1957-58)
*more applications/years may work, verify before purchasing.
Ports designed to be used with 2” round tubing.
Kit Includes:
2 – 3/8” thick, intake flanges (P&O Steel)
1 – 3” OD, 0.065 wall, 18” long, plenum tube
2 – 3” OD, concave plenum end caps
8 – 2” OD, 0.065 wall, 45 degree bend mandrel bend, runner tubes
3 – 3 bolt (Stromberg) carburetor base plates *Please email to request different carburetor types or quantities
6 – 1 ¼” OD, 0.065 wall, carb runner tubes
| Weight | 9.071847 lbs |
|---|---|
| Dimensions | 8 × 20 × 8 in |
You must be logged in to post a review.
Related products
Buick Nailhead (baby) 264-322 Motor Mount
Buick Nailhead 264-322 Log Intake Kit – 3×2, Rochester
Cadillac 331 (Late) Exhaust Flange
Includes one pair of exhaust flanges for the Cadillac 331 hot rod motor (see motor applications below). These flanges are
Chrysler Hemi 331-392 Intake Flange
Dodge Hemi 241-325 Exhaust Flange
Includes one pair of exhaust flanges for the Dodge Red Ram Hemi 241, 270, 315, 325 hot rod engine (see
Dodge Hemi 241-325 Intake Flange
Mopar Big Block 350-440 Exhaust Flange
Includes one pair of exhaust flanges for the Big Block Mopar 350, 361, 383, 400, 413, 426, 440 hot rod
Pontiac 326-455 Exhaust Flange
Includes one pair of exhaust flanges for the Pontiac V8 326, 350, 455 hot rod engine (see engine applications below).










Reviews
There are no reviews yet