Includes One Straight Lake Header Kit for the Ford FE 332, 352, 361, 390 hot rod motor (see motor applications below). These flanges are cut with a CNC HD (High Definition) Plasma cutter out of 3/8” Pickled and Oiled (P&O) steel. P&O material is hot rolled steel that has been dipped in acid to remove the mill scale and then a light coated lightly with oil. The end result is less work to clean off the mill scale as needed with hot rolled mild steel.
1 pair – 30″ long steel megaphones (1-5/8″ inlet & 3-1/2″ outlet) – 4″ outlet available upon request – please add to order notes
2 – 1-3/4″ OD, 0.065″ wall plain steel (not aluminized!) 70 degree mandrel bends
6 – 1-3/4″ OD, 0.065 wall, 10″ long steel tubing
1 pair – 3/8″ thick exhaust flanges – specific motor application listed below
(photo is shown just for reference, contents listed above is actually what you will receive)
332 cu. in (1958-59)
352 cu in (1958-67)
361 cu in (1958-59)
390 cu in (1961-71)
*more applications/years may work, verify before purchasing.
Ports designed to be used with 1 3/4” exhaust tubing.
These flanges are designed in CAD and are test fit to make sure proper fitment is achieved.