Includes One Swept Lake Header Kit for the Studebaker 224, 259, 289, 304 hot rod motor (see motor applications below). These flanges are cut with a CNC HD (High Definition) Plasma cutter out of 3/8” Pickled and Oiled (P&O) steel. P&O material is hot rolled steel that has been dipped in acid to remove the mill scale and then lightly coated with oil. The end result is less work to clean off the mill scale as needed with hot rolled mild steel.
Kit includes:
1 pair – 30″ long steel megaphones (1-5/8″ inlet with 3-1/2″ outlet)
2 – 1-1/2″ OD, 0.065″ wall plain steel (not aluminized!) 180 degree mandrel bends (customer to cut at angle needed to match megaphone angle as needed)
2 – 1-3/4″ OD, 0.065″ wall plain steel (not aluminized!) 70 degree mandrel bends
1 pair – 3/8″ thick exhaust flanges – specific motor application listed below
(photo is shown just for reference, contents listed above is actually what you will receive)
Motor Application:
Studebaker
224 cu. in (1955-56)
259 cu in (1955-64)
289 cu in (1956-64)
304 cu in (1963-64)
*more applications/years may work, verify before purchasing.
Ports designed to be used with 1 1/2” tubing for the outside ports and 1 3/4″ for the center port.
These flanges are designed in CAD and are test fit on an actual head to make sure proper fitment is achieved.