Includes One Straight Lake Header Kit for the Dodge 277, 301, 303, 313, 326, 318 Poly (A series block) hot rod motor (see motor applications below). These flanges are cut with a CNC HD (High Definition) Plasma cutter out of 3/8” Pickled and Oiled (P&O) steel. P&O material is hot rolled steel that has been dipped in acid to remove the mill scale and then a light coated lightly with oil to prevent rusting. The end result is less work to clean off the mill scale as needed with hot rolled mild steel.
1 pair – 30″ long steel megaphones (1-5/8″ inlet & 3-1/2″ outlet) – 4″ outlet available upon request – please add to order notes
2 – 1-3/4″ OD, 0.065″ wall plain steel (not aluminized!) 70 degree mandrel bends
6 – 1-3/4″ OD, 0.065 wall, 10″ long steel tubing
1 pair – 3/8″ thick exhaust flanges – specific motor application listed below
(photo is shown just for reference, contents listed above is actually what you will receive)
277 cu. in (1956)
301 cu in (1957
303 cu in (1956-57)
313 cu in (1957-64)
318 Poly cu in (1957-67)
326 cu in (1959)
*more applications/years may work, verify before purchasing.
Ports designed to be used with 1 3/4” exhaust tubing.
These flanges are designed in CAD and are test fit on an actual head to make sure proper fitment is achieved.